This reader is used to connect to the WBox_R control unit or to access systems of other manufacturers with the standard WIEGAND interface.
Versions of KRBox_5s reader
|.01||KRBox_5s Proxy||125 kHz technology|
|.04||KRBox_5s Legic Advant||LEGIC 13,56MHz technology|
|Dimensions||44 mm x 78 mm x 16 mm|
|Voltage/Power supply||9-30 V DC|
|Max. consumption||70 mA|
|RFID technology||EM Marin 125 kHz, LEGIC,|
|Reading coverage||Approx 10 cm|
|Communication interface||I2C, WIEGAND 32 - defined when ordering|
|Signalization||2x LED, 1x Buzzer|
|Range of working temperatures||-25. +50 °C|
|IP coverage||IP 65|
Running test and controls
After connecting to the power supply voltage the reader activates the green and red LED light and simultaneously turns on the buzzer for approximately 1 second. Afterwards all signalization features are brought into idle condition. After placing the ID card on the reader, a green LED flashes and at the same time the buzzer activates to signal reading the card. All signalization features can be controlled by an external LO signal from the host device.