This reader is used to connect to the WBox_R control unit or to access systems of other manufacturers with the standard WIEGAND interface.
Versions of the KRBox reader
|.01||KRBox||125 kHz technology|
|.02||KRBox Mifare||MIFARE 13,56MHz technology|
|.03||KRBox Legic Advant||LEGIC 13,56MHz|
|Dimensions||116 mm x 75 mm x 17.3 mm|
|Voltage/power supply||9-30 V DC|
|Max. consumption||70 mA|
|RFID technology||EM Marin 125 kHz, MIFARE CLASSIC, LEGIC, HITAG1(at order),|
|Reading range||approx 10 cm|
|Communication interface||I2C, WIEGAND 32 defined at order|
|Signalization||2x LED, 1x Buzzer|
|Range of working temperatures||-25. +50 °C|
|IP coverage||IP 65|
Running test and controls
After connecting to the power supply voltage the reader activates the green and red LED light and simultaneously turns on the buzzer for approximately 1 second. Afterwards all signalization features are brought into idle condition. After placing the ID card on the reader, a green LED flashes and at the same time the buzzer activates to signal reading the card. All signalization features can be controlled by an external LO signal from the host device.